Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Commerce, TX

Opener Gear & Sprocket Replacement in Commerce, TX

Stripped drive gears replaced so the motor moves the door again. Typical cost $125-$275.

Our opener gear & sprocket replacement service in Commerce, TX comes down to three things: a clear diagnosis, the right parts on the truck, and a door that is balanced and safety-tested when we finish. Stripped drive gears replaced so the motor moves the door again.

When to call for opener gear & sprocket replacement

  • The motor hums or runs but the chain or belt doesn't move
  • Grinding from inside the opener
  • Plastic shavings under the motor

Why this happens

  • A heavy, out-of-balance door wearing the gear
  • Age and wear on the nylon gear

What you can check yourself

  • Check the door's balance first. A heavy door will strip a new gear too.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

Our opener gear & sprocket replacement process

  1. Check the door's balance and springs
  2. Open the motor head and replace the gear and sprocket
  3. Grease the new gear
  4. Re-set the limits and force
  5. Test it through several cycles

How much does opener gear & sprocket replacement cost?

$125-$275Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Opener Gear & Sprocket Replacement in Commerce, TX

A closed garage in a Texas summer gets very hot, which shortens the life of opener circuit boards, capacitors and photo-eye sensors. Storms add power surges, so a surge protector is cheap insurance.

Technicians serve all of Commerce (ZIP codes 75428 and 75429), plus Greenville (14.3 mi), Sulphur Springs (18.8 mi), Farmersville (27.2 mi) and Bonham (27.9 mi). Call (833) 435-8883 to book a visit in Commerce.

Opener Gear & Sprocket Replacement: frequently asked questions

How much does opener gear & sprocket replacement cost in Commerce, TX?

Opener Gear & Sprocket Replacement typically costs $125-$275 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do opener gear & sprocket replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is opener gear & sprocket replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Texas or Commerce requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Commerce, TX

Genie Opener Circuit Board Replacement

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $175-$400

Stanley Opener Circuit Board Replacement

Stanley garage door openers are no longer made. Compatible remotes and some parts are still available for older units.

Typical $175-$400

Marantec Garage Door Opener Installation

Marantec is a German manufacturer of residential and commercial door openers.

Typical $350-$800

Opener Circuit Board Replacement

Failed logic boards and receivers replaced, often after a power surge.

Typical $175-$400

Sommer Garage Door Sensor Repair

Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Typical $100-$250

LiftMaster Commercial Door Operator Repair

LiftMaster also makes commercial trolley, jackshaft and hoist operators for sectional and rolling doors.

Typical $300-$1,200

LiftMaster Smart Garage Door Opener Setup

LiftMaster is the professional-installer brand of The Chamberlain Group. The color of the learn button on the motor unit shows which remotes are compatible (yellow on Security+ 2.0 models; purple, red, orange or green on older ones), and most current models work with the myQ app.

Typical $100-$900

CHI Overhead Doors Off-Track Garage Door Repair

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $175-$450

Rytec High-Speed Door Repair

Rytec specializes in high-speed doors for warehouses, manufacturing and cold storage.

Typical $400-$2,000

Overhead Door Opener Circuit Board Replacement

Overhead Door-brand openers come from the same company as Genie, the Overhead Door Corporation.

Typical $175-$400

Marantec Garage Door Sensor Repair

Marantec is a German manufacturer of residential and commercial door openers.

Typical $100-$250

Garage Door Safety Inspection

A full safety check of springs, cables, sensors and auto-reverse.

Typical $75-$150

Garage door stuck, noisy or broken?

Talk to a garage door technician in Commerce, TX now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote